当前位置:首页
  •   2寸证件照片
  • 姓名:  崔俊佳
  • 系别:  机械制造工程系
  • 职称/职务:  副教授
  • 办公电话:  18670737345
  • 移动电话:  18670737345
  • E-mail:  该Email地址已收到反垃圾邮件插件保护。要显示它您需要在浏览器中启用JavaScript。
  • 个人情况简介: 

     

     

    男,1983年2月生,工学博士,副教授。2012年6月在哈尔滨工业大学材料科学与工程学院获得博士学位,专业为材料加工工程,2013年5月进入湖南大学机械与运载工程学院工作,同时加入湖南大学汽车车身先进设计制造国家重点实验室。主要从事汽车车身轻量化设计、制造等方面的研究。


  • 学习、工作经历: 

     

    2002/09-2006/06,哈尔滨工业大学,材料成型及控制工程专业,学士。

    2006/09-2008/06,哈尔滨工业大学,材料加工工程专业,硕士。

    2008/09-2012/06,哈尔滨工业大学,材料加工工程专业,博士。

    2013/05-2017/01,湖南大学机械与运载工程学院(助理教授、硕士生导师)

    2017/01-至今,湖南大学机械与运载工程学院(副教授、硕士生导师)


  • 研究领域: 

     

    汽车车身轻量化设计、汽车车身轻量化制造、先进板材成形技术、异种材料焊接技术


  • 研究成果: 

     

    (1)主持和参研项目

    [1] 国家自然科学基金 高强钢板热冲压三维成形极限图的构建理论与应用研究 主持

    [2] 湖南省自然科学基金 高强钢板热变形行为研究及失效准则的建立 主持

    [3] 上汽通用五菱汽车股份有限公司 车身轻量化粘接工艺应用研究 主持

    [4] 湖南大学青年教师成长计划项目 主持

    [5] 汽车车身先进设计制造国家重点实验室人才培育计划 主持

    [6] 汽车零部件先进制造技术教育部重点实验室开放基金 主持

    [7] 先进焊接与连接国家重点实验室开放基金 主持

    [8] 材料成形与模具技术国家重点实验室开放基金 主持

    [9] 国家新能源汽车重大专项 参研

    [10] 国家973项目 多时空脉冲强磁场驱动材料局部流动行为及复合界面控制 参研

    [11] 十二五国防预研项目(涉密) 参研

    [12] 十一五国防预研项目(涉密) 参研

    [13] 国家自然科学基金 铝合金板材磁脉冲辅助冲压变形机理研究 参研

    [14] 航天一院项目 复合材料电磁铆接机理研究 参研

    [15] 上海宝钢研究院项目 汽车保险杠预埋式冷却系统热冲压模具研发 参研

    [16] 上海宝钢研究院项目 VRB变厚钢板典型车身件设计方法研究 参研

    (2)期刊及会议论文

    [1]Junjia Cui, Guangyong Sun, Guangyao Li, ZhidanXu, Paul Chu. Specific wave interface and its formation mechanism in magnetic pulse welding. Applied Physics Letters, 2014, 105 (22): 221901.

    [2]Junjia Cui, Guangyong Sun, Junrui Xu, Zhidan Xu, Xiaodong Huang, Guangyao Li. A Study on the Critical Wall Thickness of the Inner Tube for Magnetic Pulse Welding of Tubular Al-Fe Parts. Journal of Materials Processing Technology, 2016, 227: 138-146

    [3]Junjia Cui, Guangyong Sun, Junrui Xu, Xiaodong Huang, Guangyao Li. A method to evaluate the formability of high-strength steel in hot stamping. Materials & design, 2015, 77: 95-109.

    [4]Junjia Cui, Chengxi Lei, Zhongwen Xing, Chunfeng Li. Microstructure Distribution and Mechanical Properties Prediction of Boron Alloy during Hot Forming Using FE Simulation. Materials Science and Engineering A, 2012, 535: 241-251.

    [5]Junjia Cui, Chengxi Lei, Zhongwen Xing, Chunfeng Li. Predictions of the Mechanical Properties and Microstructure Evolution of High Strength Steel in Hot Stamping. Journal of Materials Engineering and Performance, 2012, 21: 2244-2254.

    [6]Junjia Cui, Chengxi Lei, Zhongwen Xing, Chunfeng Li. Analysis of Phase Transformation Simulation and Prediction of Phase Distribution in High Strength Steel in Hot Stamping. Journal of Computational and Theoretical Nano science, 2012, 9(9): 1309-1314.

    [7]Hao Jiang, Tong Luo, Guangyao Li, Xu Zhang, Junjia Cui*. Fatigue life assessment of electromagnetic riveted carbon fiber reinforce plastic/aluminum alloy lap joints using Weibull distribution. 2017, Doi.org/10.1016/j.ijfatigue.2017.08.026.

    [8]Hao Jiang, Guangyao Li, Xu Zhang, Junjia Cui*. Fatigue and failure mechanism in carbon fiber reinforced plastics/aluminum alloy single lap joint produced by electromagnetic riveting technique. Composites Science and Technology 152 (2017) 1-10.

    [9]Guangyong Sun, Huile Zhang, Guoxing Lu, Jianwen Guo, Junjia Cui*, Qing Li. An Experimental and Numerical Study on Quasi-Static and Dynamic Crashworthiness for Tailor Rolled Blank (TRB) Structures. Materials & design. 2017, 118: 175-197.

    [10]Gong zhihui, Zhan zhaobin, Zhang Xu, Sun guangyong, Zheng Gang, Cui junjia*. Research on the whole tool mesh reconstruction in the process of springback compensation for auto-body panels. International journal of material forming. 2016, 1-9.

    [11]Guangyao Li, Hao Jiang, Xu Zhang, Junjia Cui*. Mechanical properties and fatigue behavior of electromagnetic riveted lap joints influenced by shear loading. Journal of Manufacturing Processes. 2017, 26: 226-239.

    [12]崔俊佳, 袁伟, 李光耀. 汽车车身异种金属板件磁脉冲焊接工艺研究. 汽车工程, Accept. 2016

    [13]崔俊佳, 胡明, 李光耀. 汽车零部件热成形极限裕度云图的构建与应用研究. 中国机械工程, 2017, 28(03): 358-365.

    [14]李光耀,陈乾,蒋浩,张旭,崔俊佳*. 卡车车架磁脉冲铆接结构可行性研究. 塑性工程学报, 2017, 24 (3):1-6.

    [15]单业奇, 崔俊佳*, 王涛, 庞通. 磁脉冲胀形管件材料本构参数识别方法研究. 锻压技术, 2016, 41(9):71-79

    [16]崔俊佳, 邢忠文, 李春峰, 徐伟力. 高强度钢板热冲压数值模拟研究. 材料科学与工艺, 2010, 18 (Sup.1): 224-228.

    [17]崔俊佳, 孙立强, 孟令博, 章茂云. 碳纤维连接结构钛合金铆钉电磁铆接试验研究. 锻压技术, 2013, 38(2): 47-52.

    [18]崔俊佳, 于海平, 李春峰, 雷呈喜, 邢忠文. 高强钢板热冲压工艺中的相变模拟. 塑性工程学报, 2013, 20(1): 50-54.

    [19]ZhidanXu, Junjia Cui*, Haiping Yu, Chunfeng Li. Research on the Impact Velocity of Magnetic Impulse Welding of Pipe Fitting. Materials & Design, 2013, 49: 736-745.

    [20]Junrui Xu, Junjia Cui*, Qiquan Lin, Chunfeng Li. Effects of driver sheet on magnetic pulse forming of AZ31magnesium alloy sheets. The International Journal of Advanced Manufacturing Technology, 2014, 72: 791-800.

    [21]Junrui Xu, Junjia Cui*, Qiquan Lin, Yanrong Li, Chun Feng Li. Magnetic pulse forming of AZ31 magnesium alloy shell by uniform pressure coil at room temperature. The International Journal of Advanced Manufacturing Technology, 2014, 77: 289-304.

    [22]Zhang Xu, Cui junjia, Xu junrui, Li Guangyao. Microstructure investigations on 2A10 aluminum alloy bars subjected to electromagnetic impact upsetting, Materials Science and Engineering: A, 2017, 702: 142-152.

    [23]李光耀,陈侣侣,崔俊佳*。5182铝合金/HC340LA高强钢异种金属件磁脉冲焊接数值模拟与试验验证. 塑性工程学报. Accept.

    [24]Zhang Xu, Cui Junjia, Li Guangyao. Microstructural mechanism in adiabatic shear bands of Al-Cu alloy bars using electromagnetic impact upsetting. Materials Letters. 2017, 194, 62-65.

    [25]Hongsheng Liu, Junjia Cui, Kaiyong Jiang, and Guangtao Zhou. Cracking Prediction in Hot Stamping of High-Strength Steel by a Temperature-Dependent Forming Limit Surface Approach. Journal of Materials Engineering and Performance, 2016, 25(11): 4894-4901.

    [26]Junrui Xu, Junjia Cui, Qiquan Lin, Yanrong Li , Chun Feng Li. Experimental and numerical research on formability of magnetic pulse plain strain of AZ31 magnesium alloy sheets. International Journal of Precision Engineering and Manufacturing, 2015, 16, 1779-1788.

    [27]J Xu, Y Zhou, J Cui, G Sun, G Li. Experimental study for rubber pad forming process of AZ31 magnesium alloy sheets at warm temperature. The International Journal of Advanced Manufacturing Technology, 2016, DOI 10.1007/s00170-016-9152-9.

    [28]Junrui Xu, Jiai Su, Yanrong Li, Junjia Cui*, Qiquan Lin, Guangyong sun*, Guangyao Li. Thermal effects in magnetic pulse forming of magnesium alloy sheet. The International Journal of Advanced Manufacturing Technology. 2015, 81(5-8):755-770.

    [29]Junrui Xu, Qiquan Lin, Junjia Cui*, Chunfeng Li, Formability of magnetic pulse uniaxial tension of AZ31magnesium alloy sheet. The International Journal of Advanced Manufacturing Technology, 2014, 72: 665-676.

    [30]Chengxi Lei, Junjia Cui, Zhongwen Xing, Hongya Fu, Hao Zhao. Investigation of Cooling Effect of Hot-Stamping Dies by Numerical Simulation. Physics Procedia, 2012, 25:118-124.

    [31]Chengxi Lei, Junjia Cui, Zhongwen Xing, Hongya Fu. Research on Hot Stamping of Square Cup for Advanced High Strength Steel by Numerical Simulation. Journal of Computational and Theoretical Nanoscience, 2012, 9(9): 1165-1170.

    [32]雷呈喜, 崔俊佳, 邢忠文, 赵浩. 高强钢盒形件热冲压成形组织预测. 塑性工程学报, 2012, 19(6): 40-44.

    [33]Junrui Xu, Haiping Yu, Junjia Cui, Chunfeng Li. Formability of AZ31 magnesium alloy sheets in magnetic pulse bulging. Materials Science and Engineering A, 2013, 569: 150-158.

    [34]章茂云, 于海平, 孙立强, 崔俊佳, 李春峰. 8mm 2A10铝合金铆钉电磁铆接工艺试验研究.航天制造技术, 2012, 3: 7-10.

    [35]黄宗斌, 韦超忠, 徐志丹, 崔俊佳, 李光耀, 张旭. Φ6 mm-Q235钢铆钉电磁铆接工艺试验. 精密成形工程, 2017, 9(1): 76-80.

    [36]李光耀, 冯雪瑞, 蒋浩, 崔俊佳, 张旭. 碳纤维-铝合金电磁铆接与准静态对比研究. 锻压技术, 2017, Accept.

    [37]Libin Duan, Guangyong Sun, Junjia Cui, Aiguo Cheng, Tao Chen, Guangyao Li. Crashworthiness design of vehicle structure with tailor rolled blank. Structural and Multidisciplinary Optimization, 2016, 53: 321-338.

    [38]Junjia Cui, Chengxi Lei, Zhongwen Xing, Hao Zhao, Shumei Ma. The Use of Advanced High Strength Steel based on Hot Stamping Process in Vehicle Manufacturing Technologies. Proceedings of 2012 International Conference on Advanced Vehicle Technologies and Integration, 2012, 548-552.

    [39]Xiaohui Zhang, Junjia Cui*, Chengxi Lei, Zhongwen Xing. Structural Finite Element Analysis of The Fixed Stiffness Testing Instrument. Applied Mechanics and Materials, 2011, 94-96: 2102-2106.

    [40]Zhongwen Xing, Junjia Cui, Hongsheng Liu, Chunfeng Li. Numerical and Experimental Investigation into Hot Stamping of High Strength Steel Sheet for Auto B Pillar Reinforced Panel. Advanced Materials Research, 2010, (129-131): 322-327.

    [41]Chengxi Lei, Junjia Cui, Zhongwen Xing, Hongsheng Liu. Research of Shot Peening Effect of Hot-Stamping Square-cup Parts of Advanced High Strength Steel for Automobile. Proceedings of 2012 International Conference on Advanced Vehicle Technologies and Integration, 2012, 536-510.

    [42]Lei Chengxi, Cui junjia, Xing Zhongwen, Zhao hao. Research on Flow Behavior of Advanced High Strength Steel at Elevated Temperature. Material Science Forum, 2013, 749: 498-503.

    [43]Xu zhidan, Cui junjia, Yu haiping, Li chunfeng. Constitutive Relationship of 3A21 Aluminium Alloy Tube for Magnetic Pulse Forming. Applied Mechanics and Materials, 2013, 239-240: 314-319.

    [44]Xiaohui Zhang, Chengxi Lei, Junjia Cui, Zhongwen Xing. Design and Research of Stiffness Instrument for Automotive Panel. Applied Mechanics and Materials, 2011, 97-98: 694-697.

    [45]Libin Duan, Guangyong Sun, Junjia Cui, Tao Chen, Guangyao Li. Lightweight design of vehicle structure with tailor rolled blank under crashworthiness. 11th World Congress on Structural and Multidisciplinary Optimisation, 2015, Sydney Australia.

    [46]Huihui Geng, Junjia Cui, Guangyong Sun, Guangyao Li. A Study on the Critical Thickness of the Inner Tube for Magnetic Pulse Welding Using FEM and BEM. Proceedings of 7th International Conference on High Speed Forming, 2016, Dortmund, Germany.

    [47]邓将华, 李春峰, 于海平, 崔俊佳. 磁脉冲铆接铆模形式对铆钉变形的影响. 第十届全国塑性工程学术年会论文集, 2007: 647-651.

    (3)发明专利

    [1] 崔俊佳,李光耀,谷永强,李佳盈. 玄武岩纤维增强泡沫基复合保温层及其制造方法。2016107166365

    [2] 崔俊佳,李光耀,孙光永,夏泽华. 一种无铆钉铆接柔性化模具集成装置。2016107821198

    [3] 崔俊佳,李光耀,孙光永,欧航. 试验方法及基于该方法的热成形起皱极限面的建立方法。2016105286593

    [4] 崔俊佳,孙光永,李光耀,胡明. 一种汽车零部件热冲压破裂性能的评价方法。106018129A

    [5] 崔俊佳,李光耀,孙光永. 一种手持式电磁铆枪的减震隔振系统。201510004467.8

    [6] 崔俊佳,李光耀,孙光永. 一种提高金属管件的成形极限的装置。201510002746.0

    [7] 崔俊佳,孙光永,李光耀. 一种基于电磁成形技术的复合波纹管及其成形装置。201410128175.0

    [8] 崔俊佳,孙光永,李光耀. 一种基于电液成形的层合板的成形装置和方法。201410128254.1

    [9] 崔俊佳,孙光永,李光耀. 一种高强钢板热成形极限图的建立方法。201410076641.5

    [10] 崔俊佳,孙光永,李光耀,袁伟. 一种电磁脉冲径向粉末压实装置和压实方法。201510765387.4

    [11] 崔俊佳,柳泉潇潇,李光耀,孙光永. 一种用于磁脉冲焊接的圆管对心柔性夹具。105710591A

    [12] 崔俊佳,邓桦坤,李光耀,孙光永. 一种金属板材高速成形极限实验装置。201610201325.5

    [13] 崔俊佳,齐麟,李光耀,孙光永. 一种无头铆钉双侧加载磁脉冲铆接装置。201610527190.1

    [14] 崔俊佳,李光耀,孙光永,邓桦坤,胡明. 一种金属板材高速成形极限图的建立方法。201610204073.1

    [15] 李光耀,崔俊佳,陈乾,蒋浩. 一种卡车车架磁脉冲铆接装置。2016108867555

    [16] 李光耀,崔俊佳,耿辉辉,孙光永. 一种测量复杂应变路径下薄板成形极限的试验装置及方法。2016105273771

    [17] 孙光永,崔俊佳,李光耀. 一种复合吸能管的加工装置及加工方法。201410128228.9

    [18] 孙光永,崔俊佳,李光耀,刘翔. 一种金属板材热成形极限实验装置及测试方法。103852388A

    [19] 李光耀,崔俊佳,孙光永,邓桦坤. 一种金属板材高速成型极限测试方法。201610201322.1

    [20] 孙光永,崔俊佳,李光耀,蒋浩,庞通. 一种三明治结构及蜂窝结构芯体。201510348638.9

    [21] 李光耀,孙光永,崔俊佳. 一种正弦式波纹吸能管的设计方法。201510005819.1

    [22] 李光耀,孙光永,崔俊佳. 一种变厚板等截面积单向拉伸实验试样的制备方法。201510067636.2

    [23] 李光耀,孙光永,崔俊佳. 一种变厚板(VRB)成形极限应力图的构建和使用方法。201410076416.1

    [24] 孙光永,李光耀,崔俊佳,康贺贺. 一种落锤试验机的储能及复位装置。201510004805.8

    [25] 孙光永,李光耀,崔俊佳,庞通,康贺贺,段利斌. 一种检测汽车零部件耐撞性的动态冲击试验方法及装置。201510004473.3

    (4)学术及社会兼职

    [1]《材料科学》期刊编委

    [2]《American Journal of Mechanical and Materials Engineering》期刊编委

    [3]Materials and Design 审稿人

    [4]Materials Science and Engineering: A审稿人

    [5]International of Material Forming审稿人

    [6]Journal of Manufacturing Processes审稿人

    [7]Scientia Iranica Journal审稿人

    [8]Materials Chemistry and Physics审稿人

    [9]Thin-Walled Structures审稿人

    [10]ASME Journal of Manufacturing Science and Engineering审稿人

    [11]《中国机械工程》审稿人

    [12]《塑性工程学报》审稿人

    [13]广汽研究院异种材料焊接技术培训专家

    [14]广汽菲亚特汽车技术资格评审专家


  • 个人空间: 

     

    该Email地址已收到反垃圾邮件插件保护。要显示它您需要在浏览器中启用JavaScript。


Read 4492 times Last modified on 星期三, 13 9月 2017 08:40
More in this category: « 宋立军 冯慧 »
湖南大学机械与运载工程学院版权所有 ©2013 设计与技术支持 美宁设计
通讯地址:湖南长沙岳麓山   邮编:410082   Tel:0731-88823120   Fax:0731-88823120