当前位置:首页
  •   2寸证件照片
  • 姓名:  鄂加强
  • 系别:  能源与动力工程系
  • 职称/职务:  教授/博导
  • 办公电话:  暂无
  • 移动电话:  暂无
  • E-mail:  该Email地址已收到反垃圾邮件插件保护。要显示它您需要在浏览器中启用JavaScript。 ; 该Email地址已收到反垃圾邮件插件保护。要显示它您需要在浏览器中启用JavaScript。
  • 个人情况简介: 

     

           鄂加强,男,湖南湘潭县人,1972年生,热能工程专业博士,控制科学与工程博士后,机械工程博士后,教授/博士生导师,国家精品课程主讲教师。2007年荣获湖南省科技进步二等奖1项,2010年荣获湖南省教学成果二等奖1项,2011年荣获湖南省科技进步三等奖1项,2013年荣获湖南省科技进步三等奖1项,2015年荣获中国机械工业科技进步三等奖1项。

           先后为本科生开设热工测试技术、流体力学、工程热力学、换热器原理与设计和能源与动力专业导论等课程,先后为研究生开设高等工程热力学、高等燃烧学、热工过程智能控制以及热动力设备智能故障诊断等课程,已指导2名博士研究生、1名博士后、66名硕士研究生,正在指导3名博士后、7名博士研究生和15名硕士研究生。

           目前为国家自然科学基金委员会工程科学一处、二处、三处通讯评审专家,高等学校机电类学科委员会能源与动力工程学科教学委员会委员,中国内燃机学会理事,高校工程热物理学会理事,国际SCI期刊“Journal of Low Frequency Noise, Vibration and Active Control”的副主编,国际SCI期刊“Advances in Mechanical Engineering”和“Journal of Combustion”的客座主编,教育部科技奖励评审专家,湖南省自然科学基金委员会评审专家,北京市自然科学基金委员会评审专家,河北省自然科学基金委员会评审专家,广西区自然科学基金委员会评审专家,浙江省自然科学基金委员会评审专家以及湖南省内燃机学会理事,《Renewable and Sustainable Energy Reviews》、《Applied Energy》、《Energy》、《Energy Conversion and Management》、《Applied Thermal Engineering》、《Fuel》、《International Journal of Hydrogen Energy》、《International Journal of Heat and Mass Transfer》、《Applied Soft Computing》、《Energy & Fuels》、《Powder Technology》或其他国际SCI期刊《International Journal of Thermal Sciences》、《Aerospace Science and Technology》、《Experimental Thermal and Fluid Science》、《Canadian Journal of Chemical Engineering》、《Particuology》、《Korean Journal of Chemical Engineering》和《Environmental Progress & Sustainable Energy》等国内外30多个知名期刊审稿专家。


  • 学习、工作经历: 

     

    主要学习培训经历

    2013.08-2014.08    新加坡国立大学机械工程系从事学术交流与访问研究

    2012.09-2013.01    中山大学外国语学院国家公派出国留学人员英语高级班培训

    2007.11-2010.07    湖南大学机械工程博士后流动站从事流体机械现代优化设计研究

    2004.10-2006.12    湖南大学控制科学与工程博士后流动站从事智能检测、控制及智能信息融合处理研究

    1999.08-2004.09   中南大学热能工程专业(硕博连读)从事热工设备及过程检测、控制与优化研究

    1993.09-1997.07   吉林大学(原吉林工业大学)汽车工程学院热能专业学习

    主要工作经历

    2004.09-  湖南大学机械与运载工程学院从事热动力设备及工程的智能检测、故障诊断以及排放控制等教学及科研工作

    1997.07-1999.08   湘潭电机集团公司技术中心从事大型矿用自卸车(108t与154t)设计工作;


  • 研究领域: 

     

           能源与动力设备检测、仿真与优化;复杂能源动力设备高效传热与节能技术;太阳能、风能和生物质能利用工程及关键技术;复杂能源动力设备排放污染控制新技术;能源动力设备智能监测与智能控制;能源动力系统工程、能源安全及能源经济(包含节能评价)。


  • 研究成果: 

     

    获奖情况:

    [1]2010年湖南省教学成果二等奖:凸显节能减排特色,培育热能与动力工程高质量创新人才;

    [2]2007年湖南省科技进步二等奖:车用三效催化转化器关键技术及应用;

    [3]2011年湖南省科技进步三等奖:硬密封旋球阀;2010年长沙市科技进步二等奖:硬密封旋球阀;

         2013年衡阳市科技进步一等奖:智能型低能耗可变排量机油泵的研发及应用;

    [4]2013年湖南省科技进步三等奖:低能耗可变排量机油泵关键技术的研发和应用;

    [5]2015年中国机械工业科技进步三等奖:船艇用高速汽油机关键技术及应用;

    [6]2007年湖南大学“天语教师奖”;2007年湖南大学毕业实习优秀指导教师;

    [7]2007年、2008年、2009年湖南大学毕业设计优秀指导教师;

    [8]2009年指导学生作品获第二届全国大学生节能减排社会实践与科技竞赛三等奖1项;2011年指导学生获第四届全国大学生节能减排社会实践与科技竞赛三等奖1项;2012年指导学生获第五届全国大学生节能减排社会实践与科技竞赛三等奖1项;2013年指导学生获第六届全国大学生节能减排社会实践与科技竞赛三等奖1项;

    [9]2006年荣获湖南大学“优秀共产党员”称号,2011年荣获湖南大学“优秀共产党员”称号.

     

    负责或参加项目:

    [1]国家自然科学基金面上项目:Pd/石墨烯催化型旋转式微粒捕集器过滤体分区微波加热再生与热-电-化-力学耦合协同优化研究,主持,在研;

    [2]武器装备预研重点基金项目:甚高分辨率××减/隔振总体设计方法,主持,已结题;

    [3]国家自然科学基金面上项目:微粒捕集器过滤体复合再生与多场协同机理及其优化研究,主持,已结题;

    [4]湖南省自然科学基金项目:含噪声铜火法冶炼热动力学系统混沌与分形识别,主持,已结题;

    [5]湖南省教研教改项目:基于价值链驱动的能源与动力工程专业课程体系流程再造、重构与实践,主持,在研;

    [6]湖南省教研教改项目:大工程观下热物理基础课程教学内容和课程体系改革与实践,主持,已结题;

    [7]建设机械关键技术国家重点实验室开放基金项目:负压吸拾作用下环卫洗扫车气流卷吸颗粒床层的多相流动机理研究,主持,已结题;

    [8]国家留学基金项目:微尺度多孔介质稳定燃烧机理及其应用研究,主持,已结题;

    [9]中央高校基本科研业务费专项资金重点基础理论项目:工业低品位热源无机热超导高效回收基础研究,主持,已结题;

    [10] 湖南大学青年教师成长计划资助项目:电磁场作用下微尺度多孔介质稳定燃烧机理研究,主持,已结题;

    [11]湖南省工程车辆底盘制造工程技术研究中心开放基金项目:工程车辆混合动力锂电池组热流协同设计优化研究,主持,在研;

    [12]湖南省工程车辆底盘制造工程技术研究中心开放基金项目:环卫洗扫车负压吸拾机理辨析,参与,在研;

    [13]湖南省工程车辆底盘制造工程技术研究中心开放基金项目:无机热超导闭环振荡热管设计优化技术研究,参与,在研;

    [14]长沙市科技局重点项目:车用混合动力锂电池组热流设计与控制关键技术项目,主持,在研;

    [15]长沙市科技局重点项目:基于多传感器信息融合的中小吨位起重机臂筒智能液压校正装置研制,主持,已结题;

    [16]可再生能源电力技术湖南省重点实验室开放基金项目:兆瓦级风电机组风力桨叶多学科设计优化理论,主持,已结题;

    [17]校企合作项目:碟式太阳能聚光器动力学特性分析,主持,已结题;

    [18]校企合作项目:兆瓦级风力机高强度螺栓联接可靠性技术研究,主持,已结题;

    [19]校企合作项目:涡轮增压器水冷轴承体冷却水流量辨识模型,主持,已结题;

    [20]高校委托项目:新体制导引头的抗无源干扰技术研究,主持,已结题;

    [21]广州市花都区科技计划项目:机电信息整合的柔性数字化经编机研发,主持,已结题;

    [22]校企合作项目:大功率磁悬浮阀门远程控制关键技术研究,主持,已结题;

    [23]校企合作项目:1.5MW风电偏航减速机技术研究,主持,已结题;

    [24]国家“十一五”科技支撑计划重点项目:村镇低品位能源综合利用关键技术研究[2006BAJ04B04],参与,已结题;

    [25]国家自然科学基金项目:柴油机微粒捕集器多孔介质过滤体失效辨析及抗失效机理研究[51276056],参与(第2),已结题.

    [26]国家自然科学基金面上项目:汽油机沸石分子筛碳氢捕集器冷起动碳氢捕集机理及其热-流-力学耦合协同优化研究[51776062],参与(第2),在研;

    [27]湖南省自然科学基金重点项目:车用微粒捕集器复合再生过程气粒两相流动及燃烧数值模拟[06JJ20018],参与(第2),已结题.

    [28]湖南省科技计划重点项目:车用三效催化转化器高效长寿低污染关键技术与应用[2009CK2001],参与(第2),已结题.

    [29]湖南省自然科学基金项目:微粒捕集器微波及铈-锰基添加剂复合再生过程的全耦合仿真[10JJ6080],参与(第2),已结题.

    [30]湖南省自然科学基金:LED大功率路灯多场协同散热机理研究[12JJ6044],参与(第2),已结题.

    [31]湖南省教研教改项目:热能与动力工程专业以发动机排放污染及控制为特色的创新课程体系的构建与实践,参与(第2),已结题.

     

    出版专著:

    [1]鄂加强. 铜精炼过程优化建模与智能控制[M]. 长沙:湖南大学出版社,2006.

    [2]鄂加强. 智能故障诊断及其应用[M]. 长沙:湖南大学出版社,2006.

    [3]鄂加强,李志鹏,张长宗,滕达著. 新型双向硬密封大口径旋球阀现代设计方法与技术[M]. 北京:中国水利水电出版社,2011.

    [4]鄂加强,左红艳,罗周全. 神经网络模糊推理智能信息融合及其工程应用[M]. 北京:中国水利水电出版社,2012.

    [5]袁文华,鄂加强,龚金科. 柴油机高压共轨喷油系统设计优化及智能控制[M]. 北京:中国水利水电出版社,2014.

    [6]鄂加强,杨蹈宇,崔洪江,唐文武. 工程热力学[M]. 北京:中国水利水电出版社,2010.

    [7]龚金科,鄂加强,谭理刚,邓元望. 热动力设备排放污染及控制(国家“十一五规划教材”)[M]. 北京:中国电力出版社,2007.

    [8]伏军,龚金科,鄂加强. 柴油机微粒捕集器喷油助燃再生过程热工模型及其控制[M]. 北京:中国水利水电出版社,2017.

     

    专利:

    [1]鄂加强,左威,彭庆国,王曙辉,朱浩,刘腾,邓元望,龚金科. 一种用于道路清扫车的可变流通面积吸嘴[P]. ZL201510104259.5, 2016.

    [2]陈敬炜, 鄂加强, 王宇峰. 基于超/亚临界水工艺的有机废弃物两步处理系统与方法[P]. ZL2016104022719, 2016.

    [3]蔡皓,霍鹏光,鄂加强,邓元望. 一种新型类椭圆齿廓转子机油泵及其转子和转子设计方法[P]. ZL201510783644.7, 2015.

    [4]龚金科,王曙辉,鄂加强,余明果,伏军,吴钢,吁璇. 柴油机微粒捕集器主动热再生方法及其装置[P]. ZL200810031099.6, 2009.

    [5]龚金科,王曙辉,鄂加强,吴钢,杨汉乾,郭华. 一种消减柴油机微粒物质排放的方法及其装置[P]. ZL200710035168.6, 2008.

    [6]龚金科,蔡皓,蔡隆玉,鄂加强,谭理刚,邓元望. 汽车尾气三效催化转化器[P]. ZL200710034581.0, 2009.

    [7]蔡皓,龚金科,余明果,鄂加强,邓元望,耿玉鹤. 一种汽车尾气三效催化转化器系统及控制方法[P]. ZL201110071155.0,2011.

    [8]王曙辉, 龚金科, 余明果, 鄂加强, 蔡皓, 左青松. 一种用于太阳能热发电系统的体积换热吸热器[P]. ZL201110259807,2012.

    [9]邓元望, 韩卫, 龚金科, 鄂加强, 朱浩, 王兵杰, 刘腾. 一种具有碳氢捕集功能的柴油机氧化催化转化器[P]. ZL 102322320, 2012.

    [10]邓元望, 刘腾, 鄂加强, 韩卫, 朱浩, 曾谊晖. 一种用于汽油机冷启动工况的HC排放净化系统[P]. ZL102322319, 2012. 

    [11]邓元望, 韩卫, 龚金科, 鄂加强, 朱浩, 陈可亮, 刘腾. 一种具有碳氢捕集功能的汽油机尾气处理装置[P]. ZL102278182, 2012.

    论文发表情况:

        发表论文200多篇,其中发表SCI收录论文近60篇,发表EI收录论文150多篇,发表ISTP收录论文20多篇,论文代表作如下:

    2017年发表论文

    [1]Jiaqiang E*, Minhhieu Pham*, D. Zhao*, Yuanwang Deng, DucHieu Le, Wei Zuo, Hao Zhu, Teng Liu, Qingguo Peng, Zhiqing Zhang. Effect of different technologies on combustion and emissions of the diesel engine fueled with biodiesel: A review[J]. Renewable & Sustainable Energy Reviews, 2017, 80: 620-647.  SCI 1区   IF: 8.050.

    [2]Wei Zuo, Jiaqiang E*, Dandan Han, Yu Jin. Numerical investigations on thermal performance of double-layer four-channel micro combustors for micro-thermophotovoltaic system[J]. Energy Conversion and Management, 2017, 150: 343-355. SCI 1区  IF: 5.589.

    [3]Wei Zuo, Jiaqiang E*, Qingguo Peng, Xiaohuan Zhao, Zhiqing Zhang. Numerical investigations on a comparison between counterflow and coflow double-channel micro combustors for micro-thermophotovoltaic system[J]. Energy, 2017, 122: 408-419. SCI 1区  IF: 4.520.

    [4]Wei Zuo, Jiaqiang E*, Wenyu Hu, Yu Jin, Dandan Han. Numerical investigations on combustion characteristics of H2/air premixed combustion in a micro elliptical tube combustor[J]. Energy, 2017, 126, 1-12. SCI 1区 IF: 4.520.

    [5]Jiaqiang E*, Qingguo Peng*, Yuanwang Deng, Wei Zuo, Haili Liu. Numerical investigation on the combustion characteristics of non-premixed hydrogen-air in a novel micro-combustor[J]. Applied Thermal Engineering, 2017, 110: 665-677.  SCI 2区  IF: 3.356.

    [6]Wei Zuo, Jiaqiang E*, Qingguo Peng, Xiaohuan Zhao, Zhiqing Zhang. Numerical investigations on thermal performance of a micro-cylindrical combustor with gradually reduced wall thickness[J]. Applied Thermal Engineering, 2017, 113: 1011-1020.  SCI 2区 IF: 3.356.

    [7]Bin Zhang, Jiaqiang E*, Jinke Gong*, Wenhua Yuan, Xiaohuan Zhao, Wenyu Hu. Influence of structural and operating factors on performance degradation of the diesel particulate filter based on composite regeneration[J]. Applied Thermal Engineering, 2017, 121: 838-852. SCI 2区 IF: 3.356.

    [8]Yuanwang Deng, Wenping Zheng, Jiaqiang E*, Bin Zhang, Xiaohuan Zhao, Qingsong Zuo, Zhiqing Zhang, Dandan Han. Influence of geometric characteristics of a diesel particulate filter on its behavior in equilibrium state[J]. Applied Thermal Engineering, 2017, 123: 61-73. SCI 2区 IF: 3.356.

    [9]Yuanwang Deng, Jinhui Cui, Jiaqiang E*, Bin Zhang, Xiaohuan Zhao, Zhiqing Zhang, Dandan Han. Investigations on the temperature distribution of the diesel particulate filter in the thermal regeneration process and its field synergy analysis[J]. Applied Thermal Engineering, 2017, 123: 92-102. SCI 2区 IF: 3.356.

    [10]Jiaqiang E*, Cheng Qian, Hao Zhu, Qingguo Peng, Wei Zuo, Guanlin Liu. Parameters identification investigations on the hysteretic Preisach model improved by the fuzzy least square support vector machine based on adaptive variable chaos immune algorithm[J]. Journal of Low Frequency Noise, Vibration and Active Control, 2017, 36(3): 227–242. SCI 4区   IF: 1.017. 

     

    2016年及其以前发表论文

    [1]Jiaqiang E1,*, Xiaohuan Zhao1,*, Haili Liu, Jianmei Chen, Wei Zuo, Qingguo Peng. Field synergy analysis for enhancing heat transfer capability of a novel narrow-tube closed oscillating heat pipe[J]. Applied Energy, 2016, 175: 218-228. SCI 1区 IF: 7.182.

    [2]Jiaqiang E, Wei Zuo*, Xueling Liu, Qingguo Peng, Yuanwang Deng, Hao Zhu*. Effects of inlet pressure on wall temperature and exergy efficiency of the micro-cylindrical combustor with a step[J]. Applied Energy, 2016, 175: 337-345.  SCI 1区 IF: 7.182.

    [3]Teng Liu1, Jiaqiang E1,*, W. M. Yang1,*, Hui An, Hao Cai. Development of a skeletal mechanism for biodiesel blend surrogates with varying fatty acid methyl esters proportion[J]. Applied Energy, 2016, 162: 278–288. SCI 1区  IF: 7.182.   ESI Highly Cited Paper

    [4]Jiaqiang E1, Teng Liu1, W. M. Yang*, Yuanwang Deng, Jinke Gong. A skeletal mechanism modeling on soot emission characteristics for biodiesel surrogates with varying fatty acid methyl esters proportion[J]. Applied Energy, 2016, 181: 322-331. SCI 1区 IF: 7.182.

    [5]Bin Zhang, Jiaqiang E*, Jinke Gong*, Wenhua Yuan, Wei Zuo, Yu Li, Jun Fu. Multidisciplinary design optimization of the diesel particulate filter in the composite regeneration process[J]. Applied Energy, 2016, 181: 14-28. SCI 1区  IF: 7.182.

    [6]Wei Zuo, Jiaqiang E*, Haili Liu*, Qingguo Peng, Xiaohuan Zhao, Zhiqing Zhang. Numerical investigations on an improved micro-cylindrical combustor with rectangular rib for enhancing heat transfer[J]. Applied Energy, 2016, 184: 77-87. SCI 1区 IF: 7.182.

    [7]Jiaqiang E1, Teng Liu1, W. M. Yang*, Jing Li, Jinke Gong, Yuanwang Deng. Effects of fatty acid methyl esters proportion on combustion and emission characteristics of a biodiesel fueled diesel engine[J]. Energy Conversion and Management, 2016, 117: 410-419.  SCI 1区  IF: 5.589.

    [8]Jiaqiang E, Qingguo Peng*, Xueling Liu*, Wei Zuo, Xiaohuan Zhao, Haili Liu. Numerical investigation on hydrogen/air non-premixed combustion in a three-dimensional micro combustor[J]. Energy Conversion and Management, 2016, 124: 427-438. SCI 1区  IF: 5.589.

    [9]Jiaqiang E, Xiaohuan Zhao*, Yuanwang Deng, Hao Zhu. Pressure distribution and flow characteristics of closed oscillating heat pipe during starting process at different vacuum degrees[J]. Applied Thermal Engineering, 2016, 93: 166-173. SCI 2区  IF: 3.356.

    [10]Jiaqiang E*, Wei Zuo, Haojie Liu, Qingguo Peng. Field synergy analysis of the micro-cylindrical combustor with a step[J]. Applied Thermal Engineering, 2016, 93: 83-89. SCI 2区  IF: 3.356. ESI Highly Cited Paper

    [11]Jiaqiang E*, Wei Zuo, Junxu Gao, Qingguo Peng, Zhiqing Zhang, Pham Minh Hieu. Effect analysis on pressure drop of the continuous regeneration-diesel particulate filter based on NO2 assisted regeneration[J]. Applied Thermal Engineering, 2016, 100: 356-366. SCI 2区 IF: 3.356.

    [12]Wei Zuo, Jiaqiang E*, Xueling Liu, Qingguo Peng, Yuanwang Deng*, Hao Zhu. Orthogonal Experimental Design and Fuzzy Grey Relational Analysis for emitter efficiency of the micro-cylindrical combustor with a step[J]. Applied Thermal Engineering, 2016, 103: 945-951. SCI 2区 IF: 3.356. ESI Highly Cited Paper

    [13]Haili Liu, Jiaqiang E*, Yuanwang Deng*, Changqing Xie, Hao Zhu. Experimental study on pyrolysis characteristics of the tobacco stem based on the microwave heating method[J]. Applied Thermal Engineering, 2016, 106: 473-479.  SCI 2区 IF: 3.356.

    [14]Haili Liu, Jiaqiang E*, Xiaoqian Ma, Changqing Xie. Influence of microwave drying on the combustion characteristics of food waste[J]. Drying Technology, 2016, 34(12): 1397-1405. SCI 2区  IF: 1.976.

    [15]Jiaqiang E*, Ming Liu, Yuanwang Deng, Hao Zhu, Jinke Gong. Influence analysis of monolith structure on regeneration temperature in the process of microwave regeneration in the diesel particulate filter[J]. Canadian Journal of Chemical Engineering, 2016, 94(1): 168-174. SCI 4区  IF: 1.066.

    [16]Jiaqiang E, Longfu Xie, Qingsong Zuo, Guiju Zhang. Effect analysis on regeneration speed of continuous regeneration-diesel particulate filter based on NO2-assisted regeneration[J]. Atmospheric Pollution Research, 2016, 7(1): 9-17. SCI 4区  IF: 1.637.

    [17]Jiaqiang E, Cheng Qian, Teng Liu, Guanlin Liu. Chaos Analysis on the Acceleration Control Signals of the Piezoelectric Actuators in the Stewart Platform[J]. Shock and Vibration, 2016, 2016: 1-9. SCI 4区  IF: 1.281.

    [18]Qingsong Zuo, Da-ming Zhang, Jiaqiang E*, Jinke Gong. Comprehensive analysis on influencing factors of composite regeneration performance of a diesel particulate filter[J]. Environmental Progress & Sustainable Energy, 2016, 35(3): 882-890.  SCI 4区 IF: 1.672.

    [19]Bin Zhang, Jinke Gong, Jiaqiang E, Yu Li. Failure recognition of the diesel particulate filter based on catastrophe theory[J]. Canadian Journal of Chemical Engineering, 2016, 94(3): 596-602. SCI 4区. IF: 1.231.

    [20]Jiaqiang E*, Haijiao Huang, Xiaohuan Zhao. Numerical investigation on effects of bluff body in flat plate micro thermo photovoltaic combustor with sudden expansion[J]. Journal of Central South University, 2016, 23(4): 975-982. SCI 4区  IF: 0.562.

    [21]Jiaqiang E, Qingsong Zuo*, Haili Liu, Yu Li, Jinke Gong. Endpoint forecasting on composite regeneration by coupling cerium-based additive and microwave for diesel particulate filter[J]. Journal of Central South University, 2016, 23(8): 2118−2128. SCI 4区 IF: 0.562. 

    [22]Tao Chen, Zhixin Wu, Jinke Gong, Jiaqiang E. Numerical Simulation of Diesel Particulate Filter Regeneration Considering Ash Deposit[J]. Flow, Turbulence and Combustion, 2016, 97(3): 849–864. SCI 3区. IF: 1.863.

    [23]Jiaqiang E, Cheng Qian, Haili Liu, Guanlin Liu. Design of the H∞ robust control for the piezoelectric actuator based on chaos optimization algorithm[J]. Aerospace Science and Technology, 2015, 47: 238-246. SCI 2区 IF: 2.057.

    [24]Jiaqiang E, Qingsong Zuo, Yuanwang Deng, Hao Cai, Jinke Gong. Intelligent forecasting on composite regeneration endpoint of DPF in the Vehicle[C]. 2015 International Conference on Intelligent Transportation, Big Data & Smart City, Halong Bay, Vietnamese, 2015. (Organizing committee chairman)

    [25]Jiaqiang E, Cheng Qian, Teng Liu, Guanlin Liu. Research on the Vibration Characteristics of the New Type of Passive Super Static Vibratory Platform Based on the Multiobjective Parameter Optimization[J]. Advances in Mechanical Engineering, 2014, 6: 1-8.  SCI 4区 IF: 0.640.

    [26]Qingsong Zuo, Jiaqiang E*, Jinke Gong, D. M. Zhang, Tao Chen, Guohai Jia. Performance evaluation on field synergy and composite regeneration by coupling cerium-based additive and microwave for a diesel particulate filter[J]. Journal of Central South University, 2014, 21(12): 4599−4606.  SCI收录 IF: 0.520.

    [27]Guohai Jia, Jinke Gong, Jiaqiang E, Hao Cai, Shuhui Wang. Effect of Interference Fit on Fretting Wear of Gear Shaft Shoulder[J]. Journal of Central South University, 2014, 21(10): 3746-3752. SCI收录IF: 0.520.

    [28]Hao Cai, Yafei Liu, Jinke Gong, Jiaqiang E. Sulfur Poisoning Mechanism of Three Way Catalytic Converter and its Grey Relational Analysis[J]. Journal of Central South University, 2014, 21(11): 4091- 4096. SCI收录 IF: 0.520.

    [29] Jiaqiang E, Rongjia Zhu, Jianmei Chen, Yan-ping Long, Xiaofeng Hu. Oscillation heat transfer dynamic model for the new type oscillation looped heat pipe with double liquid slugs[J]. Journal of Central South University, 2012, 19(11): 3194-3201. SCI收录.

    [30]Haidong Yang, Jiaqiang E, Ting Qu. Multidisciplinary design optimization for air-condition production system based on multi-agent technique[J]. Journal of Central South University of Technology, 2012, 19(2): 527-536. SCI收录

    [31] Zhigang Zhang, Jiaqiang E, Guixiang Zhang. A novel dense spectrum correction algorithm for extracting vibration signals in internal combustion engine and its application[J]. Journal of Central South University of Technology, 2012, 19(10): 2810-2815. SCI收录

    [32] He-jun WANG, Jia-qiang E, Fei-qi DENG. A novel adaptive mutative scale optimization algorithm based on chaos genetic method and its optimization efficiency evaluation[J]. Journal of Central South University of Technology, 2012, 19(9): 2554-2560. SCI收录

    [33]Chunhua Wang, Zhaoping Zhong, Jiaqiang E. Flow regime recognition in spouted bed based on recurrence plot method[J]. Powder Technology, 2012, 219: 20-28. SCI2区,IF: 2.759.

    [34] Jiaqiang E, Yuqiang Li, Jinke Gong. Function chain neural network prediction on heat transfer performance of oscillating heat pipe based on grey relational analysis[J]. Journal of Central South University of Technology, 2011, 18(5): 1733-1737.  SCI收录

    [35] Chunhua Wang,  Zhaoping Zhong,  Rui Li,  Jiaqiang E. Intelligent fitting of minimum spout-fluidised velocity in spout-fluidised bed[J]. Canadian Journal of Chemical Engineering, 2011, 89(1): 101-107. SCI收录

    [36] Chunhua Wang, Zhaoping Zhong, Rui Li, Jiaqiang E. Recognition of the flow regimes in the spouted bed based on fuzzy c-means clustering[J]. Powder Technology, 2011, 205(1-3): 201-207.  SCI2区,IF: 2.759.

    [37] Yihui Zeng, Shaojun Liu, Jiaqiang E. Neuron PI control for semi-active suspension system of tracked vehicle and its application[J]. Journal of Central South University of Technology, 2011, 18(2): 444-450. SCI收录

    [38] Aihua Jiang, Chi Mei, Jiaqiang E, Zhangming Shi. Nonlinear combined forecasting model based on fuzzy adaptive variable weight and its application[J]. Journal of Central South University of Technology, 2010,17(4): 863-867.  SCI收录

    [39] Chunhua Wang, Zhaoping Zhong, Rui Li, Jiaqiang E. Prediction of jet penetration depth based on least square support vector machine[J]. Powder Technology, 2010, 203(2): 404-411.  SCI2区,IF: 2.759.

    [40] J. Q. E, Y. N. Wang, C. Mei, J. K. Gong. Chaotic behavior of crude copper composition time series in the process of matte converting and its predicable time scale[J]. Nonlinear Analysis: Real World Applications, 2006, 7(4): 651-661. SCI 1区 IF: 2.519.

    [41]Gang Wu, Shen Li, He Zhao, Xinglin Yang, Jiaqiang E. Experimental and frequency-domain study of acoustic damping of single-layer perforated plates[J]. Aerospace Science and Technology, 2017, 70: .doi: 10.1016/j.ast.2017.07.010.


  • 个人空间: 

     

    https://www.researchgate.net/profile/Jiaqiang_E

    http://kczx.hnu.cn/G2S/Template/View.aspx?courseId=250&topMenuId=115162&action=view&type=&name=&menuType=1&curfolid=119667


Read 5706 times Last modified on 星期三, 06 9月 2017 08:15
More in this category: « 杨靖 杨小龙 »
湖南大学机械与运载工程学院版权所有 ©2013 设计与技术支持 美宁设计
通讯地址:湖南长沙岳麓山   邮编:410082   Tel:0731-88823120   Fax:0731-88823120